China Manufacturer of Hydraulic Directional Valve Forklift Valve Cdb7
Certification: ISO9001
Media: Oil
Standard: Standard
Connection Mode: Internal Thread
Power: Hydraulic
CDB7*-F15L Multi-direction valveMulti-direction valve CDB7*-F15L is a combination of stable diverter valve and multi valve, allows steering system and cylinder working system to share the same gear pump, reducing the complexity of hydraulic system and then easy to install and maintain.This valve has the self-lock valve shaft, it can prevent vibration of forklift door frame caused by the negative pressure of tilt cylinder, and when the engine stalls, the tilt cylinder will be locked to avoid the malfunction which is possible to result in a safety hazard.It is featured with full function, high safety, compact structure, advanced & reliable performance and easy to repair and maintain, mainly applied to small tonnage forklifts, small loaders, small excavators, and also can be used in the hydraulic system of crane machinery, mining machinery and sanitation equipment.Internal stable-flow valve: the oil inlet section with an internal stable-flow valve to provide stable flow for steering system.Internal check valve: each valve section has an internal check valve to prevent the oil backflow.Self-lock of valve shaft: Prevent vibration of forklift door frame caused by the negative pressure of tilt cylinder, and when the engine stalls it will lock the tilt cylinder to avoid the malfunction which is possible to result in a safety hazard.Double relief valves: the main relief valve control the pressure of whole hydraulic system, the dividing relief valve ensures the normal working pressure of steering system.Additional valve: according to the requirement, overload valve and oil filling valve can be added at both ends of valve section.Structure type: sectional valve, any 1 to 10 sections may combine upon customer's requirement.Spool function at neutral position: A, Z, O, Y, etc. Nominal pressure (bar)200Nominal size (mm)15Nominal flow (L/min)65Section number1 to 10Dividing flow(L/min)8-16Valve shaft stroke (mm)7+7Pressure of dividing valve (bar)90Weight (kg)5.9+2.6(n-1)
Diamond Member
Audited Supplier
Hydraulic Valve Solenoid Manual Proportional Servo Logic Cartridge Block Hydraulic Manifold Group Yuekn Rexroth Parker Moog NACHI Tokyo Keiki Hawe Eaton Vicker
Shipping Cost Estimated freight per unit.: To be negotiated
Function: Balance, Pressure Regulating, Reversing, Flow Control
Installation: Plate
Drive: Electric Hydraulic
Customization: Available | Customized Request
[Features]The hydraulic valves produced by our company include parker series/Rexroth series/YUKEN series/Tokyo Keiki series/Fujikoshi series/Eaton Vickers series, solenoid valve reversing valve/proportional valve/pressure valve/logic valve/servo valve/hydraulic valve Manifold.Check valves: Z1S 6 | Z1S 10 | Z1S 16 | Z1S 22 | Z1SRA | S6 - S30 | S52 - S150 | M-SR 6-30 | M-SR 52-150Check valves, pilot to close: Z2S6 | Z2S10 | Z2S16 | Z2S22 | Z2S32Check valves, pilot operated: SV6 | SV10 | SV15 | SV20 | SV25 | SV30 | SL6 | SL10 | SL15 | SL20 | SL25 | SL30Shut-off valves, 4/2 and 4/3 directional isolator valves: Z4WE6 | Z4W(E)H10-4X | Z4W(E)H16 | Z4W(E)H22Pre-fill valves: ZSF | ZSFW | SF | SFA | SFE | SFSDirectional valves control the flow and direction of movement or rotation of hydraulic actuators. These Bosch Rexroth hydraulic valves include their directional seat or spool valves (either direct- or pilot operated):Directional seat valves: SEC 6 | M-.SED 6 | M-.SED 6…XE | M-.SED 6…XN | M-.SED 10 | M-.SED 10…XN | M-.SEW 6 | M-.SEW 6…XE | M-.SEW 10 | M-.SEW 10…XE | SE | M-.SE 6…XD | E-.SE 6…X | W-.SE 6…X, M-.SM. | M-.SH | M-.SP | KSDE.8 | KSDER0 | KSDE.1 N/P | KSDE.1 C/U | M-Z4SEHDirectional spool valves, direct operated: WE 6…E | WE 6 ../.B..XD | WE 6 ../.E..XE | WE 6 ../.B..X | WE 6 ../.E..XN | WE 10…C | WE 10…E | WE 6…H | WE 6…73…A12 | 5-.WE 10-5X | VEDS-10A-43 | VEDS-10A-53 | KKDEN8 N/P | KKDEN8 C/G/U | KKDER1 N/P | KKDER1 C/G/U | KKDER1 D/E/F | KKDER8 N/P | KKDER8 C/G/U |WH 6 | WH 6…XC | WHZ 6 | WN 10 | WP 6 | WP 6…XC | WPZ 6 | WP 10 | WMM 6 | WMM 6…XC | WMM 10 | H-4WMM | WMR 6 | WMU6 | WMD6 | WMDA6Directional spool valves, pilot operated: WH | H-.WH | WEH | H-.WEH | H-4WEH…XD | H-4WEH…XE | WHH | H-.WHH | WPH | H-.WPH | WMMH | H-.WMMH | WMRH | H-.WMRH | WMUH | H-.WMUH | WMDH| H-.WMDH | WMDAH | H-.WMDAH.The range of Bosch Rexroth pressure valves comprises: pressure relief valves, pressure sequence valves, pressure cut-off valves and pressure reducing valves:Pressure relief valves, direct operated: DBD.4K | DB 6 D | DBD | DBDH…XC…E | (Z)DBT | DZT | Z(2)DBY.DPressure relief valves, pilot operated: ZDB 6 | Z2DB 6 | ZDB 10 | Z2DB 10 | DB . K | DB 20 K | DBA | DBAW | DBAE(E) | DBA | DBAW | DB-4X/W65 | DBW-4X/W65 | DB-5X | DB…5X/…XC | DBW-5X | DB 52| DBW 52Pressure reducing valves, direct operated: DR 6 DP | DR 6 DP…XC | ZDR 6 D | ZDR 6 D…XC | DR 10 DP | ZDR 10 D | KRDPressure reducing valves, direct operated: ZDRK 6 V | ZDRK 10 V | ZDR 10 V | DR-4X | DR 20 K | DR-5X | DR 10 K | 3DR 10 | 3DR 16Pressure cut-off valves, pilot operated: KAV | DA 6 V | DA | DAWPressure sequence valves, direct operated: DZ 6 DP | DZ 10 DP | ZDZ 6 | ZDZ 10Pressure sequence valves, pilot operated: DZBosch Rexroth flow control valves and throttle valves control the flow and speed of hydraulic actuators:Throttle valves: Z2FS 6 | Z2FS 6…XC | Z2FS 10 | Z2FS 16 | Z2FS 22 | Z1FG 6 | Z.FG 10 | MG and MK | FG and FK | F5 | F10Flow control valves: 2FRM 6 K | 2FRM 6 | Z2FRM 6 | 2FRM 10 K | 2FRM 10 | 2FRH 10 | 2FRW 10 | 2FRM 16 | 2FRH 16 | 2FRW 16 | 3FRM | Z4S 6 | Z4S 10 | Z4S 16Bosch Rexroth directional cartridge valves are designed for a compact block design:Logic elements - directional function: LC2A | LC | LFA | LFA..E..Logic elements - pressure function: LC..DB, LFA..DB, LFA..DB..E (pressure relief function), LC..DR and LFA..DB (pressure reducing function, rest position open) | LC..DB and LFA..DR (pressure reducing function, rest position closed) | LC..DB, LFA..DZ (pressure sequence function).Please contact us for details, advice and configuration options, if you cannot see the Bosch Rexroth hydraulic valves that you need listed below - we'll still be able to help![Products][Company Profile ] FAQQ1: Are you trading company or manufacturer ?A: We are trading company and factory.Q2: How long is your delivery time?A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.Q3: Do you provide samples ? is it free or extra ?A: We can provide samples, but not for free.Q4: What is your terms of payment ?A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Cr3 Zinc Plating Zinc Nickel Plating Carbon Steel Hydraulic Control Check Valve
Material: Carbon Steel
Connection Form: Thread
Driving Mode: Hydraulic
Nominal Pressure: PN1.0-32.0MPa
Channel: Straight Through Type
Material: carbon steel or stainless steelTreament : Cr3 Zinc plating Zinc Nickel platingOpening Presure: The standard openning pressure is 1 bar ( if needs the opening pressure with 0.2,0.5,1,2,3,4,5,6 bar, may indicates specially when placing order)The opening pressure changes in 20% permission.