Category
Metallic & Non-Metallic Products & Energy
- Solar & Renewable Energy
- Solar Collector (7)
- Solar Energy System (1,093)
- Solar Cells & Panels (222)
- Solar Charger (20)
- Solar Light (7)
- Other (6)
- Solar & Wind Inverter (6)
- Solar Brackets (6)
- Solar Controller (6)
- Solar Glass (6)
- Solar Vacuum Tube (6)
- Solar Water Heater (6)
- Other Solar & Renewable Energy (4)
- MORE
Vacuum Tube Solar Collector with Increasing 15% Heat-Collecting Efficiency 360 Degree Reflecting CPC Reflector Designed by German
Certification: Solar Keymark
Concentrating: Yes
Working Temperature Range: High Temperature
Type: Pressurized
Application: Water Heater, Solar Thermal, Air Conditioning System
Scope of DeliveryFully pre-assembled unit comprising- 6, 9, 12, 15 or 18 evacuated tubes based on the thermos flask principle- manifold with direct flow heat conduction unit and dry tube connection- CPC-reflectorCollectors are packed in individual boxes. In addition, there is a sun protection sheet over the evacuated tubes.Installation types- Pitched roof, flat roof, on-wallAdvantages and benefits- Short installation times due to complete pre-assembled collectors.- Simple and reliable connection technology in order to extend several collectors side by side through pre-assembled screw connections. Further tubing and an extensive thermal insulation is not necessary.- Integrated return pipe and highly efficient thermal insulation.- Manageable module sizes for a very high performance and a quick and easy installation.- Flow and return pipes may be fitted on the left or the right side of the manifold.- High flexibility due to the different widths and lengths of the collectors.- Quick and easy exchange of the evacuated tubes without using any tools.Performance characteristics- Low pressure loss allows several modules to be connected in series- Minimum of soldering points ensures a high leakage safety- Well-known indestructibility of Ritter Solar tubes confirmed by the hailstone test DIN EN 12975-2- High energy yield in the transitional period and winter- In wintery conditions with a 400 W/m² Irradiation and 0 ° C air temperature at a temperature of 20 ° C, Ritter Solar evacuated tube collectors already have a higher energy yield than flat collectors.- Extremely low heat loss due to the high vacuum.- Outstanding design.Specification Series CPC 1518 Number of evacuated tubes 18 η0 in relation to aperture, EN 12975 % 64.2 a1 with wind, in relation to aperture W/(m 2 k) 0.89 a2 with wind, in relation to aperture W/(m 2 k 2 ) 0.001 Yield forecast(location Wurzburg, Germany, reference area 3 m 2 ) kWh/m 2 a 651 Yield forecast(location Wurzburg, Germany, reference area 5 m 2) kWh/m 2 a 589 Grid dimensions (length x height x depth) m2.08X1.64X0.1 Gross surface area m 23.41 Aperture area m 23.0 Collector contents l 2.4 Weight kg 54 Max. working overpressure bar 10 Max. stagnation temperature.1) °C 272 Connection diameter, compression fitting mm 15 Sensor sleeve mm 6 Collector material Al / Cu / glass / silicone / PBT / EPDM / TPE Glass tube material borosilicate glass 3.3 Selective absorber coating material SS-AL-N/Cu Glass tube (Ø ext./Ø int./wall thickn./tube lgth.) mm47/37/1.6/1500 Color (aluminum frame profile, anodized) aluminum grey Color (plastic parts) black Thermal shock test / ITW test number 06COL513/1 Hailstone test according to DIN EN 12975-2 / TUV test number 435/142448 EC type examination Z-IS-DDK-MUC-07-08-100029919-003 DIN CERTCO registration number 011-7S1948 RCompany informationLinuo Ritter International Co., Ltd focus on the solar collector, solar water heater, air source heat pump. We have ISO:9001, ISO:14001, CE, Solar keymark certificates to support our products. We are one of the biggest manufacture of solar water heater in China, we have sold 5 million sets of SWH and 2 million sets of solar collector every year. We can provide good quality product to the customer, best price, lead-time, after-sales. We have professional engineer to update the products to make it more competitive.At present, we have sold our products to many countries, such as German, USA, Canada, UK, South Africa, etc.We do OEM for the customers, providing products, better price, good aftersales etc.You can see the production line for air source heat pump as bellow:We have certificate to support our productsThermal project application samples:1.Household solar water system2.Engineering solar water system3.Solar cooling system4.Central solar water systemProduct producing procedureFAQQuestion1: Why customer choose Linuo Ritter?Answer: Linuo Ritter International Co., Ltd focus on the solar collector, solar water heater, air source heat pump. It has four types of products to meet the different demand from the customer. Linuo Ritter also has big business scale in domestic market and overseas market.Question2: What's your delivery time?Answer: For repeat order, maybe 20days. for the first order, one month.Question3: What's your payment term?Answer: For the first time cooperation, 30% deposit, balance 70% against B/L copy. If the customer will set a long-term cooperation, maybe the payment term can be OA after placing many time orders.Question4: What's your aftersales?Answer: In general, we offer free charge of spare parts to the customer, if the customer have some technical problem, then we can provide technical supporting.
Diamond Member
Audited Supplier
24mm Heat Pipe Thermosyphon Aluminum Alloy Solar Water Heater Energy System
Certification: ISO, CE
Concentrating: Yes
Working Temperature Range: High Temperature
Type: Vacuum Solar Collector
Application: Water Heater, Solar Thermal, Air Conditioning System
Aluminum Alloy Heat Pipe Thermosyphon Solar Collector Heat Pipe (24mm) Vacuum Tube 58-1800mm Pressure Solar Collector Main specifications :Inner manifold: Copper header pipe , Potable water rated.Maximum pressure: 1000kPa, Size 45mm x 1mm thicknessOuter manifold: Aluminium alloy with Anodized or Powder Coated Finish , thickness 2mm 80mm distance between vacuum tubesInsulation: High quality Glass Wool (K = 0.043W/mK), 50mmVacuum tube: Borosilicate 3.3 twin wall glass 58x1800mm, AlN/AIN-SS/CU coating coating,Vacuum: P<5x10-3 Pa, 58mm x 1800mm Heat pipe: High purity "oxygen free" copper pipe with Aluminum fin ,Startup temperature -45 C ;24mm diameter*55mm length condenser , 1mm thickness; 8mm diameter*1650 mm length Body,0.6 mm thicknessFrame: 6005-T5 Aluminium Alloy 2.5mm thicknessStainless steel SUS 304 boltsRubber Components :HTV Silicone Rubber (UV stabilised)Connection Options:22mm OD copper (Europe) Optional accessories :Reflector:aluminum component ModelLight Area(m2)Vacuum TubeCapacity20GP/40HQØ(mm)L(mm)NO . (Liters)Loading QtyIPRB B 581810 Pro1.685818001085-100174/423IPRB B 581812 Pro2.1758180012100-120153/372IPRB B 581815 Pro2.6558180015125-150128/311IPRB B 581818 Pro3.1258180018150-180102/251IPRB B 581820 Pro3.4458180020170-20095/230IPRB B 581824 Pro4.0858180024200-24082/200IPRB B 581825 Pro4.2458180025210-25079/192IPRB B 581830 Pro4.8958180030250-30067/163production processCompany introduction: Changzhou Imposol New Energy Co., Ltd. Is top ten in china for exportation.with more and more customers from Europe,Australia,Africa and Asia joinning us.With products' high performance and reasonable price backing us, With products'quality and company's credit supporting us,We believe that we are turning the world greener day by day-together! As an OEM factory in china,We specialize in manufacturing various types of solar water heater,solar collectors and vacuum tubes.Our product range include;compact and split,low pressure and high pressure vacuum tube solar water heater;thermosyphon;heat pipe,Upipe and SCHMV tube solar collector;flat plate solar water heater and solar collector.We have also designed and carried out some wonderful solar water projects for hospitals, schools,factories and familieS as well as our own design for new products.Why Choose Us? 1.Our Product is economic and environmental; 2.Our Product is durable and has a long service life; 3.We have rich production experience.The quality of Product is reliable; 4.We have a perfect production process and strict quality control system; 5.We have perfect service system and will give you the best service. 6.Professional Production Line Certificate:ExhibitionOur solar products--solar project
25tubes Stainless Steel Non Pressure Vacuum Tube Solar Collector
Certification: ISO, CE
Concentrating: Yes
Working Temperature Range: High Temperature
Type: Vacuum Solar Collector
Application: Water Heater
25tubes Stainless Steel Non Pressure All Glass Vacuum Tube Solar CollectorFeatures description:The glass tube solar collector (nonpressurized) consists of glass vacuum tube, nonpressurized manifold and supporting bracket, working principle is thermosyphon the same as integrated non-pressurized system, water is heated directly in glass tubes, taking advantage of the natural circulation due to smaller density in hot water than cold water. Series or/and parallel arrays of solar collector is usually adopted for large-scale hot water heating project.1. Especially designed for large-scale hot water heating system, supplying hot water for dormitories, hotels, restaurants, schools, hospitals, factories, swimming pools, and some other sites requiring hot water use or house heating.2. All-glass vacuum tube, most economical and good performance at the same time3. Processed color steel shell and galvanized bracket make it a long lifespan as vacuum tubes4. Easy installation and connection and little maintenance neededWarranty: 3 years international responsibility for integrated collector exchange and 15 years for glass vacuum tube compensation due to original quality problems25tubes Stainless Steel Non Pressure Solar CollectorSpecifications: Vacuum tube Spec.(mm) Φ47×1500 Φ58×1800 Tube (pcs) 20 / 25 / 30 /36 Material 3.3 Borosilicate glass, magnetron spluttering coating Coating AL/AL-ALN(H)/AL-ALN(L)/ALN or Cu/SS-ALN(H)/SS-ALN(L)/ALN Manifold Dimension 180*160mm, 1.0 inch inlet & outlet Inner tank Food-grade stainless steel SUS304-2B 0.4mm Tank shell White color steel / Silver fluorocarbon PVDF 0.4mm Insulation High-density polyurethane integrated foam-forming layer Bracket Coated galvanized angle steel 30*30*3mm Accessories Stainless bolts & nuts, waterproof silicon rubber seal, dustproof rubber seal, plastic tube holder Working pressure ≤ 1 bar Tilt angle 0~ 90° Hail resistance Φ25mm diameterCompetitive Advantage:1. It is the most economical solar collector which is widely used in large-scale hot water heating system, supplying hot water for dormitories, hotels, restaurants, schools, hospitals, factories, swimming pools, and other places requiring large amount hot water application.2. Special design with all rights reserved by INLIGHT, the arc-angle manifold makes the manifold with much more stress to strike and expansion.3. INLIGHT glass tube collector can be connected in series-parallel arrays and used in active or passive solar water heating system with stable and reliable performance.4. INLIGHT glass tube and manifold is anti-freezing device, the collector can be used in extremely cold area with anti-freezing system design and pipeline insulation.5. High absorption: αs ≥ 90%, low-emissivity: εh ≤ 8%, daily average thermal efficiency ηd ≥ 50%6. INLIGHT modularized design makes the collector more adaptable to different architecture structure and locations.
Suntask Fast Assembly CPC Reflector Vacuum Tube Solar Thermal Collector (SHC24)
Max. Capacity: >200L
Structure: Separate Type
Pressure: Pressurized
Interior Material: Copper
Collector Components: Glass Vacuum Tube
Suntask New Fast Assembly CPC heat pipe solar collector SHC modelFeatures: Model No: SHC8 SHC10 SHC12 SHC15 SHC18 SHC20 SHC241.Sunlight concentrators make the efficiency doubly increased;2. Fast assembly CPC concertrators more easy installation and transportation;3. 360 sunlight absorber, hot water in cloudy;4. Overheating protection just disassembly the CPC in summer;5. Temperature startup more faster than the normal solar thermal collectors;6. Applicable for the industry heating;7. More thermal power based on the same aperature area;8. With EN12975, Solar Keymark Advantages:1. Heat pipe solar collector with CPC can get the highest power output and with largest aperture area;2. fast assembly: more convenient for installation and for transportation;3. high perfomance heat pipe, cold resistance -45°C, highest stagnation temperature 280°C.4. The power output higher 50% compare to the normal solar collectors. Smaller installation area but equal to the same power output.Working PrincipleThe selective coating on the inner tube converts solar energy into heat energy and transfers heat to the heat pipes by aluminum fins. The liquid in the heat pipe changes into vapour which rises to the condenser. The heat then passes through the heat exchanger and the vapour becomes liquid, returing to the bottom of the heat pipe. The heat conducts to the heat transfer liquid via a copper pipe. This transference of heat into the liquid creats a continuous circulation as long as the collector is heated by the sun.SpecificationModels Vacuum Tube Condenser(mm) Capacity(Liter/Day/60ºC) Effective collector area M2 Loading Quantity20'G/40'HQSHC8/SHC8X 58*1800*8pc 14/24 110-130 1.42 178/433SHC10/SHC10X 58*1800*10pc14/24 140-170 1.80 154/374 SHC12/SHC12X 58*1800*12pc 14/24160-180 2.17 144/349 SHC15/SHC15X 58*1800*15pc14/24 200-220 2.74 116/282 SHC18/SHC18X 58*1800*18pc14/24 250-270 3.31 97/236 SHC20/SHC20X 58*1800*20pc14/24 280-300 3.68 85/207 SHC24/SHC24X 58*1800*24pc14/24 350-370 4.44 76/184 CertificationsPackaging & ShippingApplicationsExhibitionsCompany Information ZHEJIANG SHENTAI SOLAR ENERGY CO., LTD was established in 2000 year and covers an area of 36000 square meters. Suntask is a high-tech enterprise, specialize in manufacturing solar collector, solar water heater, photovoltaic system, air-source heat pump.
25tubes Stainless Steel Non Pressure Vacuum Tube Solar Collector
Certification: ISO, CE
Concentrating: Yes
Working Temperature Range: High Temperature
Type: Vacuum Solar Collector
Application: Water Heater
25tubes Stainless Steel Non Pressure All Glass Vacuum Tube Solar CollectorFeatures description:The glass tube solar collector (nonpressurized) consists of glass vacuum tube, nonpressurized manifold and supporting bracket, working principle is thermosyphon the same as integrated non-pressurized system, water is heated directly in glass tubes, taking advantage of the natural circulation due to smaller density in hot water than cold water. Series or/and parallel arrays of solar collector is usually adopted for large-scale hot water heating project.1. Especially designed for large-scale hot water heating system, supplying hot water for dormitories, hotels, restaurants, schools, hospitals, factories, swimming pools, and some other sites requiring hot water use or house heating.2. All-glass vacuum tube, most economical and good performance at the same time3. Processed color steel shell and galvanized bracket make it a long lifespan as vacuum tubes4. Easy installation and connection and little maintenance neededWarranty: 3 years international responsibility for integrated collector exchange and 15 years for glass vacuum tube compensation due to original quality problems25tubes Stainless Steel Non Pressure Solar CollectorSpecifications: Vacuum tube Spec.(mm) Φ47×1500 Φ58×1800 Tube (pcs) 20 / 25 / 30 /36 Material 3.3 Borosilicate glass, magnetron spluttering coating Coating AL/AL-ALN(H)/AL-ALN(L)/ALN or Cu/SS-ALN(H)/SS-ALN(L)/ALN Manifold Dimension 180*160mm, 1.0 inch inlet & outlet Inner tank Food-grade stainless steel SUS304-2B 0.4mm Tank shell White color steel / Silver fluorocarbon PVDF 0.4mm Insulation High-density polyurethane integrated foam-forming layer Bracket Coated galvanized angle steel 30*30*3mm Accessories Stainless bolts & nuts, waterproof silicon rubber seal, dustproof rubber seal, plastic tube holder Working pressure ≤ 1 bar Tilt angle 0~ 90° Hail resistance Φ25mm diameterCompetitive Advantage:1. It is the most economical solar collector which is widely used in large-scale hot water heating system, supplying hot water for dormitories, hotels, restaurants, schools, hospitals, factories, swimming pools, and other places requiring large amount hot water application.2. Special design with all rights reserved by INLIGHT, the arc-angle manifold makes the manifold with much more stress to strike and expansion.3. INLIGHT glass tube collector can be connected in series-parallel arrays and used in active or passive solar water heating system with stable and reliable performance.4. INLIGHT glass tube and manifold is anti-freezing device, the collector can be used in extremely cold area with anti-freezing system design and pipeline insulation.5. High absorption: αs ≥ 90%, low-emissivity: εh ≤ 8%, daily average thermal efficiency ηd ≥ 50%6. INLIGHT modularized design makes the collector more adaptable to different architecture structure and locations.
Suntask Fast Assembly CPC Reflector Vacuum Tube Solar Thermal Collector (SHC24)
Max. Capacity: >200L
Structure: Separate Type
Pressure: Pressurized
Interior Material: Copper
Collector Components: Glass Vacuum Tube
Suntask New Fast Assembly CPC heat pipe solar collector SHC modelFeatures: Model No: SHC8 SHC10 SHC12 SHC15 SHC18 SHC20 SHC241.Sunlight concentrators make the efficiency doubly increased;2. Fast assembly CPC concertrators more easy installation and transportation;3. 360 sunlight absorber, hot water in cloudy;4. Overheating protection just disassembly the CPC in summer;5. Temperature startup more faster than the normal solar thermal collectors;6. Applicable for the industry heating;7. More thermal power based on the same aperature area;8. With EN12975, Solar Keymark Advantages:1. Heat pipe solar collector with CPC can get the highest power output and with largest aperture area;2. fast assembly: more convenient for installation and for transportation;3. high perfomance heat pipe, cold resistance -45°C, highest stagnation temperature 280°C.4. The power output higher 50% compare to the normal solar collectors. Smaller installation area but equal to the same power output.Working PrincipleThe selective coating on the inner tube converts solar energy into heat energy and transfers heat to the heat pipes by aluminum fins. The liquid in the heat pipe changes into vapour which rises to the condenser. The heat then passes through the heat exchanger and the vapour becomes liquid, returing to the bottom of the heat pipe. The heat conducts to the heat transfer liquid via a copper pipe. This transference of heat into the liquid creats a continuous circulation as long as the collector is heated by the sun.SpecificationModels Vacuum Tube Condenser(mm) Capacity(Liter/Day/60ºC) Effective collector area M2 Loading Quantity20'G/40'HQSHC8/SHC8X 58*1800*8pc 14/24 110-130 1.42 178/433SHC10/SHC10X 58*1800*10pc14/24 140-170 1.80 154/374 SHC12/SHC12X 58*1800*12pc 14/24160-180 2.17 144/349 SHC15/SHC15X 58*1800*15pc14/24 200-220 2.74 116/282 SHC18/SHC18X 58*1800*18pc14/24 250-270 3.31 97/236 SHC20/SHC20X 58*1800*20pc14/24 280-300 3.68 85/207 SHC24/SHC24X 58*1800*24pc14/24 350-370 4.44 76/184 CertificationsPackaging & ShippingApplicationsExhibitionsCompany Information ZHEJIANG SHENTAI SOLAR ENERGY CO., LTD was established in 2000 year and covers an area of 36000 square meters. Suntask is a high-tech enterprise, specialize in manufacturing solar collector, solar water heater, photovoltaic system, air-source heat pump.
Split Heat Pipe Solar Collector System with Solar Keymark Certification
Max. Capacity: >200L
Structure: Separate Type
Pressure: Pressurized
Interior Material: Copper
Collector Components: Glass Vacuum Tube
Heat Pipe (14mm) Vacuum Tube 58-1800mm Pressure Solar CollectorMain specifications :Inner manifold: Copper header pipe , Potable water rated.Maximum pressure: 1000kPa, Size 35mm x 1mm thicknessOuter manifold: Aluminium alloy with Anodized or Powder Coated Finish , thickness 2mm 80mm distance between vacuum tubesInsulation: High quality Glass Wool (K = 0.043W/mK), 50mmVacuum tube: Borosilicate 3.3 twin wall glass 58x1800mm, AlN/AIN-SS/CU coating coating,Vacuum: P<5x10-3 Pa, 58mm x 1800mm Heat pipe: High purity "oxygen free" copper pipe with Aluminum fin ,Startup temperature -45 C ;14mm diameter*55mm length condenser , 1mm thickness; 8mm diameter*1650 mm length Body,0.6 mm thicknessFrame: 6005-T5 Aluminium Alloy 2.5mm thicknessStainless steel SUS 304 boltsRubber Components :HTV Silicone Rubber (UV stabilised)Connection Options:22mm OD copper (Europe)Optional accessories :Reflector:aluminum component ModelLight Area(m2)Vacuum TubeCapacity (Liters)20GP/40HQLoading QtyØ(mm)L(mm)NO .IPRB B 5818101.685818001085-100174/423IPRB B 5818122.1758180012100-120153/372IPRB B 5818152.6558180015125-150128/311IPRB B 5818183.1258180018150-180102/251IPRB B 5818203.4458180020170-20095/230IPRB B 5818244.0858180024200-24082/200IPRB B 5818254.2458180025210-25079/192IPRB B 5818304.8958180030250-30067/163Production processChangzhou Imposol New Energy Co., Ltd. is top ten in China for exportation. With more and more customers from Europe, Australia, Africa and Asia joinning us. With products' high performance and reasonable price backing us, With products'quality and company's credit supporting us, We believe that we are turning the world greener day by day-together! As an OEM factory in China, We specialize in manufacturing various types of solar water heater, solar collectors and vacuum tubes. Our product range include; Compact and split, low pressure and high pressure vacuum tube solar water heater; Thermosyphon; Heat pipe, Upipe and SCHMV tube solar collector; Flat plate solar water heater and solar collector. We have also designed and carried out some wonderful solar water projects for hospitals, schools, factories and familieS as well as our own design for new products. Solar Collector SpecificationsLighting area ()SizeCapacity (L)IPB-1.5/diemeter47-12 tube1.151730*870*2580IPB-1.5/diemeter47-14 tube1.351730*1000*25100IPB-1.5/diemeter47-16 tube1.91730*1300*25120IPB-1.5/diemeter47-20 tube2.11730*1390*25150IPB-1.8/diemeter58-12 tube1.32030*785*2580IPB-1.8/diemeter58-14 tube1.52030*935*25100IPB-1.8/diemeter58-16 tube1.762030*1085*25120IPB-1.8/diemeter58-20 tube2.32030*1385*25150Why Choose Us? 1. Our Product is economic and environmental; 2. Our Product is durable and has a long service life; 3. We have rich production experience. The quality of Product is reliable; 4. We have a perfect production process and strict quality control system; 5. We have perfect service system and will give you the best service. 6. Professional Production LineExhibition