Category
Electrical Equipment
- Sensor
- Liquid Level Sensor (15)
- ABS Sensor (7)
- Flow Sensor (6)
- Image Sensor (6)
- Inertial Sensor (6)
- Current Sensor (5)
- Differential Pressure Sensor (5)
- Fiber Optic Sensor (5)
- Infrared Sensor (5)
- Displacement Sensor (4)
- Gas Sensor (4)
- Load Cell (4)
- Temperature & Humidity Sensor (4)
- Torque Sensor (4)
- Water Leak Sensor (4)
- Light Sensor (3)
- Other (3)
- Other Sensors (3)
- Photoelectric Sensor (3)
- Pressure Sensor (3)
- Throttle Position Sensor (3)
- Ultrasonic Sensor (3)
- Voltage Sensor (3)
- MORE
Nin 2m Xk-15-5 Water Tank Float Level Switch Floating Ball Liquid Level Cable Float Switch
Production Capacity: 100000pieces/Month
Type: Floating Ball
Contact: Contact
Output Signal Type: Switching Type
Production Process: Normal Wirewound
Instruction for pressure control for water pump 1. The appliance combined with a pump connected by a flexible cable,can be used for the auto-control and no water protection of the water lever in water towers and pools. 2.If you need to extend the wire, be very careful to seal tight the wire splice if it's gonna be underwater. 3.The float switch can be used for an in-let flow of water and out-let flow of water from the tank to controlled the level of water, it works in both ways. 4.Note: Please carefully read the user manual for instructions, if your pump power is over 900W, an AC Contactor is Needed. 5. Technical features *Rated Voltage :AC 250V(380V)*Maximum Current :10(3)A*Frequency 50-60HZ*Maximum Operating Temperature :0-80ºC*Protecting Grade : IP68CS 6. Installation(1) Fix the counterweight on the electrical cable to control the height of the water.lever.(The counterweight is only provided on request.)(2) Connect the flexible cable with the pump and fix the cable in the water tank.(3) The length of the cable section between the fixture point of the same and the regulator body determines the total extension of the float and the height of the water level.During installation,the eventual cable joining section must never be immersed in water
Diamond Member
Audited Supplier
Nin 2m Xk-15-4 Water Tank Float Level Switch Floating Ball Liquid Level Cable Float Switch
Production Capacity: 100000pieces/Month
Type: Floating Ball
Contact: Contact
Output Signal Type: Switching Type
Production Process: Normal Wirewound
Instruction for pressure control for water pump 1. The appliance combined with a pump connected by a flexible cable,can be used for the auto-control and no water protection of the water lever in water towers and pools. 2.If you need to extend the wire, be very careful to seal tight the wire splice if it's gonna be underwater. 3.The float switch can be used for an in-let flow of water and out-let flow of water from the tank to controlled the level of water, it works in both ways. 4.Note: Please carefully read the user manual for instructions, if your pump power is over 900W, an AC Contactor is Needed. 5. Technical features *Rated Voltage :AC 250V(380V)*Maximum Current :10(3)A*Frequency 50-60HZ*Maximum Operating Temperature :0-80ºC*Protecting Grade : IP68CS 6. Installation(1) Fix the counterweight on the electrical cable to control the height of the water.lever.(The counterweight is only provided on request.)(2) Connect the flexible cable with the pump and fix the cable in the water tank.(3) The length of the cable section between the fixture point of the same and the regulator body determines the total extension of the float and the height of the water level.During installation,the eventual cable joining section must never be immersed in water
Nin Xk-70ab Float Switch Automatic Simple Structure Performance Reliable Water Level Controller
Production Capacity: 100000pieces/Month
Type: Floating Ball
Contact: Contact
Output Signal Type: Switching Type
Production Process: Normal Wirewound
Instruction for pressure control for water pump 1. The appliance combined with a pump connected by a flexible cable,can be used for the auto-control and no water protection of the water lever in water towers and pools. 2.If you need to extend the wire, be very careful to seal tight the wire splice if it's gonna be underwater. 3.The float switch can be used for an in-let flow of water and out-let flow of water from the tank to controlled the level of water, it works in both ways. 4.Note: Please carefully read the user manual for instructions, if your pump power is over 900W, an AC Contactor is Needed. 5. Technical features *Rated Voltage :AC 250V(380V)*Maximum Current :10(3)A*Frequency 50-60HZ*Maximum Operating Temperature :0-80ºC*Protecting Grade : IP68CS 6. Installation(1) Fix the counterweight on the electrical cable to control the height of the water.lever.(The counterweight is only provided on request.)(2) Connect the flexible cable with the pump and fix the cable in the water tank.(3) The length of the cable section between the fixture point of the same and the regulator body determines the total extension of the float and the height of the water level.During installation,the eventual cable joining section must never be immersed in water
Nin 2m Xk-15-2 Water Tank Float Level Switch Floating Ball Liquid Level Cable Float Switch
Production Capacity: 100000pieces/Month
Type: Floating Ball
Contact: Contact
Output Signal Type: Switching Type
Production Process: Normal Wirewound
Instruction for pressure control for water pump 1. The appliance combined with a pump connected by a flexible cable,can be used for the auto-control and no water protection of the water lever in water towers and pools. 2.If you need to extend the wire, be very careful to seal tight the wire splice if it's gonna be underwater. 3.The float switch can be used for an in-let flow of water and out-let flow of water from the tank to controlled the level of water, it works in both ways. 4.Note: Please carefully read the user manual for instructions, if your pump power is over 900W, an AC Contactor is Needed. 5. Technical features *Rated Voltage :AC 250V(380V)*Maximum Current :10(3)A*Frequency 50-60HZ*Maximum Operating Temperature :0-80ºC*Protecting Grade : IP68CS 6. Installation(1) Fix the counterweight on the electrical cable to control the height of the water.lever.(The counterweight is only provided on request.)(2) Connect the flexible cable with the pump and fix the cable in the water tank.(3) The length of the cable section between the fixture point of the same and the regulator body determines the total extension of the float and the height of the water level.During installation,the eventual cable joining section must never be immersed in water
Nin 2m Xk-15-1 Water Tank Float Level Switch Floating Ball Liquid Level Cable Float Switch
Production Capacity: 100000pieces/Month
Type: Floating Ball
Contact: Contact
Output Signal Type: Switching Type
Production Process: Normal Wirewound
Instruction for pressure control for water pump 1. The appliance combined with a pump connected by a flexible cable,can be used for the auto-control and no water protection of the water lever in water towers and pools. 2.If you need to extend the wire, be very careful to seal tight the wire splice if it's gonna be underwater. 3.The float switch can be used for an in-let flow of water and out-let flow of water from the tank to controlled the level of water, it works in both ways. 4.Note: Please carefully read the user manual for instructions, if your pump power is over 900W, an AC Contactor is Needed. 5. Technical features *Rated Voltage :AC 250V(380V)*Maximum Current :10(3)A*Frequency 50-60HZ*Maximum Operating Temperature :0-80ºC*Protecting Grade : IP68CS 6. Installation(1) Fix the counterweight on the electrical cable to control the height of the water.lever.(The counterweight is only provided on request.)(2) Connect the flexible cable with the pump and fix the cable in the water tank.(3) The length of the cable section between the fixture point of the same and the regulator body determines the total extension of the float and the height of the water level.During installation,the eventual cable joining section must never be immersed in water
Nin 2m Xk-15-6 Water Tank Float Level Switch Floating Ball Liquid Level Cable Float Switch
Production Capacity: 100000pieces/Month
Type: Floating Ball
Contact: Contact
Output Signal Type: Switching Type
Production Process: Normal Wirewound
Instruction for pressure control for water pump 1. The appliance combined with a pump connected by a flexible cable,can be used for the auto-control and no water protection of the water lever in water towers and pools. 2.If you need to extend the wire, be very careful to seal tight the wire splice if it's gonna be underwater. 3.The float switch can be used for an in-let flow of water and out-let flow of water from the tank to controlled the level of water, it works in both ways. 4.Note: Please carefully read the user manual for instructions, if your pump power is over 900W, an AC Contactor is Needed. 5. Technical features *Rated Voltage :AC 250V(380V)*Maximum Current :10(3)A*Frequency 50-60HZ*Maximum Operating Temperature :0-80ºC*Protecting Grade : IP68CS 6. Installation(1) Fix the counterweight on the electrical cable to control the height of the water.lever.(The counterweight is only provided on request.)(2) Connect the flexible cable with the pump and fix the cable in the water tank.(3) The length of the cable section between the fixture point of the same and the regulator body determines the total extension of the float and the height of the water level.During installation,the eventual cable joining section must never be immersed in water
Nin 2m Xk-15-3 Water Tank Float Level Switch Floating Ball Liquid Level Cable Float Switch
Production Capacity: 100000pieces/Month
Type: Floating Ball
Contact: Contact
Output Signal Type: Switching Type
Production Process: Normal Wirewound
Instruction for pressure control for water pump 1. The appliance combined with a pump connected by a flexible cable,can be used for the auto-control and no water protection of the water lever in water towers and pools. 2.If you need to extend the wire, be very careful to seal tight the wire splice if it's gonna be underwater. 3.The float switch can be used for an in-let flow of water and out-let flow of water from the tank to controlled the level of water, it works in both ways. 4.Note: Please carefully read the user manual for instructions, if your pump power is over 900W, an AC Contactor is Needed. 5. Technical features *Rated Voltage :AC 250V(380V)*Maximum Current :10(3)A*Frequency 50-60HZ*Maximum Operating Temperature :0-80ºC*Protecting Grade : IP68CS 6. Installation(1) Fix the counterweight on the electrical cable to control the height of the water.lever.(The counterweight is only provided on request.)(2) Connect the flexible cable with the pump and fix the cable in the water tank.(3) The length of the cable section between the fixture point of the same and the regulator body determines the total extension of the float and the height of the water level.During installation,the eventual cable joining section must never be immersed in water
Rkl-01 0.1%Fs Deep Well Water Tank Submersible Water Liquid Level Sensor
Type: Submersible
Contact: Contact
Output Signal Type: Analog Type
Production Process: Normal Wirewound
Feature: Corrosion Resistant
RKL-01 0.1%Fs Deep Well Water Tank Submersible Water Liquid Level Sensor Product DescriptionRKL-01 Submersible Liquid Level Transmitter is with stainless steel isolation diaphragm diffusion silicon pressure core body, the pressure core body adopts the process of laser trimming resistor for a wide temperature range of zero and sensitivity temperature compensation. Special cable for air-venting conduit and waterproof technology ensures water tightness, and ventilation between inside and outside , so as to acquire accurate and stable measuring data.FEATURES High accuracy, High sensitivity Fast response Good stability Strong resistance to interface Anti-corrosion material optional Low temperature drift Wide Temperature Range Compensation APPLICATIONS Agricultural irrigation Petroleum Chemical Power generation plant Urban water drainage Hydrographic survey Environmental protectionSPECIFICATIONSItemTechnical specificationsRange0 ~ 0.5m…200mH2O or 0 ~ 5KPa…2MPaOutput4-20mA,0-5V,0-10V,RS485Supply Voltage10-30VDC,24V typ.Over Pressure2×FSMeasuring MediumThe liquid(not sticky ) compatible with 316 stainless steelTotal Accuracy0.1%FS,0.3%FS(0.25%FS),0.5%FSLong-term Stability0.1%FS/year typ.,0.2%FS/year max.Ingress ProtectionIP68Operating Temperature-40ºC~ +80ºCCompensating Temperature-10ºC~ 70ºCTemperature Drifting0.03%FS/ºC typ.,0.05%FS/ºCCycle Life1*10^8 @25ºCMain MaterialSensor:316L,housing:304SS(316L is optional)CableOuter material:PUR,Atmospheric pressure compensation cable,Polymer waterproof plug at cable endPower ConsumptionCurrent output:(U*0.02)W, Voltage output:(U*0.008)W, Digital output:(U*0.015)WLoad CapacityCurrent output:≤(U-7)/0.02Ω, Voltage output:≥100kΩWeight(probe unpacked)Approx. 230gStorage Condition10ºC-50ºC@20%-90%RHDetailed PhotosApplicationTestimonialCompany Profile FAQQ: Are you the final manufacturer?A: Yes, We are SENSOR manufacturer and exporter in china with 10+ years experience and with the factory authorized by SGS. Q: Do you offer the OEM service?A: Yes, we can offer OEM service and design the logo marking for you. But the minimum quantity is 10pcs for the first order . Q: Do you offer free samples?A: Sorry , we do not offer free samples . You should pay for the samples and freight cost. Q: What payment ways do you accept?A: You can pay us by T/T , PayPal , and West Union . Q: What is your delivery time?A: It is in 6-8 working days since the payment confirmed . If quantity is more than 100pcs /order, it will need extra 3-5 working days .Q: What is your normal delivery way?A: Goods will be sent by DHL / FEDEX / UPS / EMS / TNT / or other proposed forwarders. Q: How is your quality assurance service?A: Our service is free exchange within one month and 12 months quality guarantee if non-manmade damage. Q: Could we make a visit to your factory?A: Yes, you are welcomed . But before that, we will do the visiting investigation.Contact Us