Nin Intelligent Automatic Voltage Stabilizers Over and Under Voltage Protector Over Current Protector with LED Digital Voltage

Production Capacity: 100000pieces/Month

Task: Adjust

Structure: Combination

Mathematical Model: Linear

Signal: Continuous

Intelligent overvoltage & undervoltage & overcurrent reclosing protection device is a comprehensive intelligent protection device integrated with overvoltage protection, underyoltage proteciton and ovedrcurrent protection. This product is able to cut off the power supply instantaneously and protect the equipment from being burned for the overvoltage fault,undervotage fault and overcurrent fault.The protection device can automatically restore power supply when the circuit restore to the normal condition.Overvoltage value,undervoltge value, overcurrent value and delay value of this product can be set by users.Users can adjust the corresponding parameters according to actual situation. Microprocessorimport processing chip SSOP-32Over-voltage protecting range230V-300V OFFUnder-voltage protecting range140V-210V OFFDelayed recovery time range1-300sOperating voltageAC 220VContact rating63ADimension81*36*60mmConnectionUpper input &under outputShell's materialflame retardant nylon PA66Rated current (A) 32 40 50 63Section area of conductor (mm²) 6 10 10 10

Zhejiang Ninuo Electrical Co., Ltd.

Diamond Member

Audited Supplier

Zhejiang,China

DIN Rail DC Current/Voltage 4-20mA/0-5V/0-10V Isolation Trasnmitter DIN1X1 Isoem U (A) -P-O

Input: 0-5V/0-10V/1-5V/0-±5V/0-±10V etc

Output: 0-5V/0-10V/1-5V/0-±5V/0-±10V etc

Isolation Method: Electromagnetic Isolation

Isolation Voltage: 3000VDC

Package: DIN35

DIN Rail DC Current/Voltage 4-20mA/0-5V/0-10V Isolation Trasnmitter DIN1x1 ISOEM U(A)-P-ODescriptionDIN Rail DC Current/Voltage 4-20mA/0-5V/0-10V Isolation Trasnmitter(No Gain/Zero Adj.)Characteristic:·Efficiency grade: 0.1/0.2/0.5·International standard signal input: 0-5V/0-10V/1-5V/0-±5V/0-±10V , 0-10mA/0-20mA/4-20mA·Output internal signal with high load capability: 5V/0-10V/1-5V/0-±5V/0-±10V,0-10mA/0-20mA/4-20mA and so on·Extremely high linearity in whole process(Nonlinearity<0.1%)·Three-port Isolation:Input/output/power,need not ZA and Gain adjustment.·Can not use in strong magnetic field SituationApplication Solutions:The Universal Connection Solutions for Industrial Sensor and Instruments (ISO 4-20mA) SeriesThe External Protection of Isolation Amplifier Transmitter IC Model Selection:For more information, please feel free to contact us:Other products:Commonly used two-wire passive isolation amplifier, isolation transmitter IC, Sunyuan product technical information download: 1,4-20mA (0-20mA) Current Loop Isolator IC: ISOS 4-20mA 2,4-20mA two-wire passive I/V conversion isolation transmitter IC: ISO 4-20mA-O series 3,4-20mA isolation controller (active signal PLC current loop active load) IC: ISO 4-20mA-E4,Two-wire passive sensor 4-20mA loop isolation distributor IC: ISO 4-20mA-F 5,Two-wire voltage signal power distribution isolation transmitter IC: ISO V-4-20mA Commonly used active type (external auxiliary power supply required) isolation amplifier transmitter IC, product selection application data download: 1,ISO mV series: millivolt-level analog small signal dedicated isolation amplifier IC 2, ISO EM U(A)-P-O-T Series: Zero-point, gain-adjustable analog isolation amplifier isolation transmitter3, ISO EM A(U)-P-O-S Series: Input Distribution Isolation Transmitter IC 4, ISO EM-U(A)-P-O-O Series: Analog Input Isolation Transmitter with 1 to 2 Output Low Cost Small Size IC mounted Package 5, ISO EM A-P-O Series: 0-±10V Bilateral DC (Voltage/Current) Signal Isolation Amplifier Isolation Transmitter IC 6, DIN3 ISOEM U-P-O(A-P-O) Series: Single DIN35 rail mounting packaging low cost small volume isolation transmitter7,DIN 1X2 ISOEM U(A)-P-O Series: one input and two output DIN35 rail mounting packaging isolation transmitter8,DIN 2X1 C-P-O Series: 2 input and 1 output analog average isolation transmitter 9,DIN 2X2 ISOEM U(A)-P-O Series: two in two out DIN35 rail mounting isolation transmitter10,DIN 1X3 ISOEM U(A)-P-O Series:one in three out DIN35 Rail mounting isolation transmitter 11,DIN ISO AC Series: Passive two-wire AC to DC signal isolation transmitter12,ISO EMH 4-20mA Series: High isolation barrier for track voltage monitoring 13,ISO F-P-O Series: Frequency Signal (FV/FI Conversion) Isolated Converter IC14,ISO U(A)-P-F Series: Analog Signal to Frequency Pulse Signal (V/F) Isolated Transmitter IC15,ISO EM RMS-P-O Series: Analog True RMS (RMS) Signal Isolation Transmitter Isolation Amplifier 16.Large current output type high precision signal transmitter

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China

Multimeter Voltage Tester Digital Clamp Meter RMS Ncv 6000 Counts Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity

Brand: Mayilon

Customized: Customized

Certification: CE, RoHS

Display: Digital

Voltage: Max 600V DC or 600V AC

Multimeter Voltage Tester Digital Clamp Meter RMS NCV 6000 Counts Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Product DescriptionThe instrument specifies one year as a cycle, and shall be re-calibrated under 18ºC ~ 28ºC, with relative humidity less than 75%.OverviewSelect measurement function and range automatically.Overload protection throughout the range.Max. voltage between measurement terminal and ground: 600V DC or 600V ACOperating height: Max. 2000mDisplay: LCDMax. display value: 6000 digit.Polarity indication: Automatic indication, and '-' indicates negative.Over range display: '0L' or '-0L'.Sampling time: About 3 times/second.,bargraph 10 times/secondUnit display: Function and electricity quantity unit display.Automatic shutdown time: 15 minutesPower supply: 1.5V AAA battery × 3Battery under-voltage indication: LCDdi splay symbolTemperature coefficient: Less than 0.1×accuracy/ºC.Operating temperature: 18ºC ~ 28ºC.Storage temperature: -10ºC ~ 50ºC. Detailed PhotosPackaging & ShippingGross weight477.2gNet weight225.4gProduct size23*8*3.7cmPortable bag11*24*4.5cmColor box12*24.4*5.7cm

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China

Single Channel Frequency to DC Current Voltage Isolation Amplifier

Efficiency Grade: 0.1/0.2

Nonlinearity: <2%

Auxiliary Power Supply: 5V,12V,15V,24VDC

Isolation Voltage: 3000VDC

Transport Package: DIN35 Rail Mounted, DIN 35

DIN Rail Frequency Signal to 0-5V, 0-10V, 4-20mA Transmitter Applications:Sine wave, square wave, sawtooth wave etc. Signal isolated amplifier and converterDC signal converter to isolated frequency pulse signalAccurate digital voltage testing metersA/D isolated converter instrumentsData testing and remote monitor instrumentAnalog signal data acquisitionGround interference controlCharacteristic:Features:·Change the input signal into unit impulse signal·Efficiency grade: 0.1/0.2·International standard signal input: 0-5V/0-10V/1-5V, 0-10mA/0-20mA/4-20mA·Standard signal output: 0-5KHz/0-10KHz /1-5KHz and so on·Extremely high linearity in whole process(Nonlinearity<2%)·3kV Isolation among Signal input/output/ Accessorial power supplyModel and Description: Signal Input (Hz)Signal outputAssistant Power Supply (VDC)Power ConsumptionIsolation (DC)Accuracy (%)Temp.DriftOperatingTemp.Non-Linearity (%)Response TimeV0-1K0-5K0-10K1-5V0-5V 0-10V5/1215/241W3000V0.1 0.2 0.5100-20-+85º C≤ 0.1≤ 10mS I 4-20Ma 0-20mA

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China

Single Channel Frequency to DC Current Voltage Isolation Amplifier

Efficiency Grade: 0.1/0.2

Nonlinearity: <2%

Auxiliary Power Supply: 5V,12V,15V,24VDC

Isolation Voltage: 3000VDC

Transport Package: DIN35 Rail Mounted, DIN 35

DIN Rail Frequency Signal to 0-5V, 0-10V, 4-20mA Transmitter Applications:Sine wave, square wave, sawtooth wave etc. Signal isolated amplifier and converterDC signal converter to isolated frequency pulse signalAccurate digital voltage testing metersA/D isolated converter instrumentsData testing and remote monitor instrumentAnalog signal data acquisitionGround interference controlCharacteristic:Features:·Change the input signal into unit impulse signal·Efficiency grade: 0.1/0.2·International standard signal input: 0-5V/0-10V/1-5V, 0-10mA/0-20mA/4-20mA·Standard signal output: 0-5KHz/0-10KHz /1-5KHz and so on·Extremely high linearity in whole process(Nonlinearity<2%)·3kV Isolation among Signal input/output/ Accessorial power supplyModel and Description: Signal Input (Hz)Signal outputAssistant Power Supply (VDC)Power ConsumptionIsolation (DC)Accuracy (%)Temp.DriftOperatingTemp.Non-Linearity (%)Response TimeV0-1K0-5K0-10K1-5V0-5V 0-10V5/1215/241W3000V0.1 0.2 0.5100-20-+85º C≤ 0.1≤ 10mS I 4-20Ma 0-20mA

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China

Multimeter Voltage Tester Digital Clamp Meter RMS Ncv 6000 Counts Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity

Brand: Mayilon

Customized: Customized

Certification: CE, RoHS

Display: Digital

Voltage: Max 600V DC or 600V AC

Multimeter Voltage Tester Digital Clamp Meter RMS NCV 6000 Counts Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Product DescriptionThe instrument specifies one year as a cycle, and shall be re-calibrated under 18ºC ~ 28ºC, with relative humidity less than 75%.OverviewSelect measurement function and range automatically.Overload protection throughout the range.Max. voltage between measurement terminal and ground: 600V DC or 600V ACOperating height: Max. 2000mDisplay: LCDMax. display value: 6000 digit.Polarity indication: Automatic indication, and '-' indicates negative.Over range display: '0L' or '-0L'.Sampling time: About 3 times/second.,bargraph 10 times/secondUnit display: Function and electricity quantity unit display.Automatic shutdown time: 15 minutesPower supply: 1.5V AAA battery × 3Battery under-voltage indication: LCDdi splay symbolTemperature coefficient: Less than 0.1×accuracy/ºC.Operating temperature: 18ºC ~ 28ºC.Storage temperature: -10ºC ~ 50ºC. Detailed PhotosPackaging & ShippingGross weight477.2gNet weight225.4gProduct size23*8*3.7cmPortable bag11*24*4.5cmColor box12*24.4*5.7cm

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China

DIN Rail DC Current/Voltage 4-20mA/0-5V/0-10V Isolation Trasnmitter DIN1X1 Isoem U (A) -P-O

Input: 0-5V/0-10V/1-5V/0-±5V/0-±10V etc

Output: 0-5V/0-10V/1-5V/0-±5V/0-±10V etc

Isolation Method: Electromagnetic Isolation

Isolation Voltage: 3000VDC

Package: DIN35

DIN Rail DC Current/Voltage 4-20mA/0-5V/0-10V Isolation Trasnmitter DIN1x1 ISOEM U(A)-P-ODescriptionDIN Rail DC Current/Voltage 4-20mA/0-5V/0-10V Isolation Trasnmitter(No Gain/Zero Adj.)Characteristic:·Efficiency grade: 0.1/0.2/0.5·International standard signal input: 0-5V/0-10V/1-5V/0-±5V/0-±10V , 0-10mA/0-20mA/4-20mA·Output internal signal with high load capability: 5V/0-10V/1-5V/0-±5V/0-±10V,0-10mA/0-20mA/4-20mA and so on·Extremely high linearity in whole process(Nonlinearity<0.1%)·Three-port Isolation:Input/output/power,need not ZA and Gain adjustment.·Can not use in strong magnetic field SituationApplication Solutions:The Universal Connection Solutions for Industrial Sensor and Instruments (ISO 4-20mA) SeriesThe External Protection of Isolation Amplifier Transmitter IC Model Selection:For more information, please feel free to contact us:Other products:Commonly used two-wire passive isolation amplifier, isolation transmitter IC, Sunyuan product technical information download: 1,4-20mA (0-20mA) Current Loop Isolator IC: ISOS 4-20mA 2,4-20mA two-wire passive I/V conversion isolation transmitter IC: ISO 4-20mA-O series 3,4-20mA isolation controller (active signal PLC current loop active load) IC: ISO 4-20mA-E4,Two-wire passive sensor 4-20mA loop isolation distributor IC: ISO 4-20mA-F 5,Two-wire voltage signal power distribution isolation transmitter IC: ISO V-4-20mA Commonly used active type (external auxiliary power supply required) isolation amplifier transmitter IC, product selection application data download: 1,ISO mV series: millivolt-level analog small signal dedicated isolation amplifier IC 2, ISO EM U(A)-P-O-T Series: Zero-point, gain-adjustable analog isolation amplifier isolation transmitter3, ISO EM A(U)-P-O-S Series: Input Distribution Isolation Transmitter IC 4, ISO EM-U(A)-P-O-O Series: Analog Input Isolation Transmitter with 1 to 2 Output Low Cost Small Size IC mounted Package 5, ISO EM A-P-O Series: 0-±10V Bilateral DC (Voltage/Current) Signal Isolation Amplifier Isolation Transmitter IC 6, DIN3 ISOEM U-P-O(A-P-O) Series: Single DIN35 rail mounting packaging low cost small volume isolation transmitter7,DIN 1X2 ISOEM U(A)-P-O Series: one input and two output DIN35 rail mounting packaging isolation transmitter8,DIN 2X1 C-P-O Series: 2 input and 1 output analog average isolation transmitter 9,DIN 2X2 ISOEM U(A)-P-O Series: two in two out DIN35 rail mounting isolation transmitter10,DIN 1X3 ISOEM U(A)-P-O Series:one in three out DIN35 Rail mounting isolation transmitter 11,DIN ISO AC Series: Passive two-wire AC to DC signal isolation transmitter12,ISO EMH 4-20mA Series: High isolation barrier for track voltage monitoring 13,ISO F-P-O Series: Frequency Signal (FV/FI Conversion) Isolated Converter IC14,ISO U(A)-P-F Series: Analog Signal to Frequency Pulse Signal (V/F) Isolated Transmitter IC15,ISO EM RMS-P-O Series: Analog True RMS (RMS) Signal Isolation Transmitter Isolation Amplifier 16.Large current output type high precision signal transmitter

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China

Multimeter Voltage Tester Digital Clamp Meter RMS Ncv 6000 Counts Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity

Brand: Mayilon

Customized: Customized

Certification: CE, RoHS

Display: Digital

Voltage: Max 600V DC or 600V AC

Multimeter Voltage Tester Digital Clamp Meter RMS NCV 6000 Counts Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Product DescriptionThe instrument specifies one year as a cycle, and shall be re-calibrated under 18ºC ~ 28ºC, with relative humidity less than 75%.OverviewSelect measurement function and range automatically.Overload protection throughout the range.Max. voltage between measurement terminal and ground: 600V DC or 600V ACOperating height: Max. 2000mDisplay: LCDMax. display value: 6000 digit.Polarity indication: Automatic indication, and '-' indicates negative.Over range display: '0L' or '-0L'.Sampling time: About 3 times/second.,bargraph 10 times/secondUnit display: Function and electricity quantity unit display.Automatic shutdown time: 15 minutesPower supply: 1.5V AAA battery × 3Battery under-voltage indication: LCDdi splay symbolTemperature coefficient: Less than 0.1×accuracy/ºC.Operating temperature: 18ºC ~ 28ºC.Storage temperature: -10ºC ~ 50ºC. Detailed PhotosPackaging & ShippingGross weight477.2gNet weight225.4gProduct size23*8*3.7cmPortable bag11*24*4.5cmColor box12*24.4*5.7cm

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China