Category
Construction & Building Materials
Chinadrip Irrigation Other Watering PE Material Pipe Fittings Barbed PE Pipe Fittings
Material: PE
Hardness: Hoses
Type: Plastic Material
Color: Color
Hollow: Pipe Fittings
Chinadrip irrigationOur Irrigation Products Line include micro-sprinkler system, drip irrigation system, filter system, fertilizer system, garden watering kit, tubing and their fitting etc.All of these products are perfectly manufactured by the advanced technology and good quality materials, widely apply in agricultural irrigation, landscape, family garden, greenhouse and sport course so on.With our products, your irrigation systems will work reliable, durable and easy to handle & control. LDPE Tubing1 Polyethy lende hose manufactured from the highest garde of polyether lende resins. Which provide maximum resistance to UV degradation and stress cracking.2 Various diameters.coil lengths and working pressure are available for selection.3 Ideal for installation of mainline and sub-line in irrigation system.4 Under the sun exposure, the PE pipe with white color outside can be effective to prevent water from high temperature and avoid to hurt the crops. LDPE Tubing FittingsOur LDPE tubing valves Products include lock-offtake valve ,barb offtake valve, Maxi valve, Thread-barb valve and so on,
Diamond Member
Audited Supplier
Other Watering Farm Irrigation Irrigation Pipe Fittings
Diameter: Od 20mm-110mm
Material: Plastic
Transport Package: Carton
Specification: 20mm-110mm
Trademark: RUNHUA
Product Description1.PE pipe is high-density polyethylene plastic pipe often used for water transmission system in household and commercial industries. 2.Product bearing pressure is related to time and ambient temperature. At 20 ° C, the diameter is 20-110m3. The product can carry a maximum pressure of 16 bar,and the diameter of 75-110mm can carry a maximum pressure of 10 bar.Fittings Advantages1)Healthy, conforming to drinking water standards2)Resistant to high temperatures, good impact strength3)Convenient and reliable installation, low construction expenses4)Excellent heat-insulation property from minimum thermal conductivity5)Lightweight, convenient to transport and handle.6)Sound insulation (reduced by 40% compared to galvanized steel pipes)7)Light colors and excellent design ensure suitability for both exposed and hidden installation8)long life spanProduct Specification Product name Compression Fitting Drip Irrigation Pipe Fittings Material:PEFeature:Eco-FriendlyColor:Blue/BlackDiameter20/25/32/40/50/63/75/90/110 1/2'' 3/4'' 1'' 11/4'' 11/2'' 2'' 21/2'' 3'' 4''PackageInternation export packagePaymentT/T L/C Western UionDeliveryWithin 15 days after we get the paymentShipmentby sea/air/expressProduct Application Compression Fitting Drip Irrigation Pipe Fittings 1.It is an important water-saving method to improve the quality of surface irrigation water, shorten irrigation time and improve irrigation efficiency.2.When irrigation with the same amount of water, the advance speed of intermittent irrigation water flow is 1-3 times that of continuous irrigation water, which greatly reduces the deep seepage, increases the uniformity of irrigation degree and makes the utilization coefficient of field water reach 0.8-0.90. Compression fittings extensive use of various water pipe connections, good connection performance, fast and direct,no leakage.Company InformationShan dong run hua water-saving irrigation technology co., ltd was established in 2012 and is located in jinan city, Shandong province , enjoying convenient transportation and beautiful environment, Our company covers an area of 5000 square meters and has more than 70 employees. We are specialized in agricultural, greenhouse, garden irrigation products. We also specialized in cloud platform auto irrigation system in China, easily control the irrigation system by mobile phone. Our company has rich experience in both manufacturer and quality control. Our main products include drip tape, drip pipe, pe pipe, pvc pipe, layflat hose, pe quick connect fittings, pvc fittings, rain spray hose, sprinklers both hanging and standing, different flow rate droppers, filter and fertilizer. Besides, we are making great efforts to develop new products to meet different requirements. We also welcome OEM and ODM orders. Our company has passed ISO 9 0 0 1 certification and water saving products certification to strictly control the product quality. we have excellent teams who focus on product development and design, quality control and inspection and company running. Adhering to the business principle of mutual benefits, we have had a reliable reputation among our customers because of our professional services, quality products and competitive prices. We warmly welcome customers from at home and abroad to establish cooperation and create a bright future with us together. CertificationOur Services
Other Watering Farm Irrigation Irrigation Pipe Fittings
Diameter: Od 20mm-110mm
Material: Plastic
Transport Package: Carton
Specification: 20mm-110mm
Trademark: RUNHUA
Product Description1.PE pipe is high-density polyethylene plastic pipe often used for water transmission system in household and commercial industries. 2.Product bearing pressure is related to time and ambient temperature. At 20 ° C, the diameter is 20-110m3. The product can carry a maximum pressure of 16 bar,and the diameter of 75-110mm can carry a maximum pressure of 10 bar.Fittings Advantages1)Healthy, conforming to drinking water standards2)Resistant to high temperatures, good impact strength3)Convenient and reliable installation, low construction expenses4)Excellent heat-insulation property from minimum thermal conductivity5)Lightweight, convenient to transport and handle.6)Sound insulation (reduced by 40% compared to galvanized steel pipes)7)Light colors and excellent design ensure suitability for both exposed and hidden installation8)long life spanProduct Specification Product name Compression Fitting Drip Irrigation Pipe Fittings Material:PEFeature:Eco-FriendlyColor:Blue/BlackDiameter20/25/32/40/50/63/75/90/110 1/2'' 3/4'' 1'' 11/4'' 11/2'' 2'' 21/2'' 3'' 4''PackageInternation export packagePaymentT/T L/C Western UionDeliveryWithin 15 days after we get the paymentShipmentby sea/air/expressProduct Application Compression Fitting Drip Irrigation Pipe Fittings 1.It is an important water-saving method to improve the quality of surface irrigation water, shorten irrigation time and improve irrigation efficiency.2.When irrigation with the same amount of water, the advance speed of intermittent irrigation water flow is 1-3 times that of continuous irrigation water, which greatly reduces the deep seepage, increases the uniformity of irrigation degree and makes the utilization coefficient of field water reach 0.8-0.90. Compression fittings extensive use of various water pipe connections, good connection performance, fast and direct,no leakage.Company InformationShan dong run hua water-saving irrigation technology co., ltd was established in 2012 and is located in jinan city, Shandong province , enjoying convenient transportation and beautiful environment, Our company covers an area of 5000 square meters and has more than 70 employees. We are specialized in agricultural, greenhouse, garden irrigation products. We also specialized in cloud platform auto irrigation system in China, easily control the irrigation system by mobile phone. Our company has rich experience in both manufacturer and quality control. Our main products include drip tape, drip pipe, pe pipe, pvc pipe, layflat hose, pe quick connect fittings, pvc fittings, rain spray hose, sprinklers both hanging and standing, different flow rate droppers, filter and fertilizer. Besides, we are making great efforts to develop new products to meet different requirements. We also welcome OEM and ODM orders. Our company has passed ISO 9 0 0 1 certification and water saving products certification to strictly control the product quality. we have excellent teams who focus on product development and design, quality control and inspection and company running. Adhering to the business principle of mutual benefits, we have had a reliable reputation among our customers because of our professional services, quality products and competitive prices. We warmly welcome customers from at home and abroad to establish cooperation and create a bright future with us together. CertificationOur Services
Copper Pressure Elbow and Other Sockets and Taps Copper Pressure Pipe Fittings Elbow of Water Supply System
Connection: Press
Shape: Equal
Head Code: Round
Angle: 90 Degree
Wall Thickness: 1.5mm
Zhejiang Jiangxin copper pipeline Co., Ltd. was established in 1990,located in the Ruanshi Industrial Park in Zhuji, Zhejiang province. The two section of the company covers an area of 20000 kilo meters and more than 200 employees. After 28 years of unremitting efforts with higher standards, the company has transformed from the original family workshop to a modern scale enterprise. The product line extends from the single copper refrigeration parts to a number of thousands of products, covering refrigeration,heating,machine fittings, water pipe fittings and valves etc. And strive to open up new areas and new channels to achieve the vision of pipe fittings leading enterprisesThe company has formed five series of products: Copper capillary series, Copper pressfit series, AC copper pipe fittings, Valve, cards and thread brass fittings. All the series of product not only to meet the customer's requirements for the national standard CJ/T-2000, the British standard BS864-2, the American Standard ASME B16.22-1995, the European standard EN1254-2 , but also to accept all kinds of non - standard fittings based on the special needs.The products of Jiangxin pipeline are certified by ISO9001 international quality system certification and AS 3688 Australia standard. The production process of raw materials inspection, raw material processing, annealing process, product quality inspection and finished packaging are strictly carried out according to Australian standards. Under constant demands and improvements, Jiang Xin has achieved the forefront of the industry in the following aspects.Rw material control. First, each batch of raw materials must be supplied with certificate of qualification and material element certificate. In accordance with the supplier's material sheet, the material is promptly notified to the responsible personnel of the material inspection, and the sample is inspecting. the unqualified raw materials will not be accepted. Second, the raw material, due to the change of the internal crystal after the forging process, we will test the rough after the forging in the lab. Third, because of the special use requirements of some products, such as the sealing product and the pressfit product, third times of stress need to be carried out, so the material composition is tested for third times. To ensure that the raw materials of the final product are qualified.Annealing process is a important step in the processing of products. Better annealing process can greatly improve the durability and safety of products. Our annealing process is carried out in strict accordance with Australian standards, and the products are annealed at stages. For example, the crystal will change and reorganize when the brass material is heated to a certain temperature, so the temperature control is critical, and the dezine resistance of the material can not be damaged. The DZR brass (Dezincification resistance of brass) exported to Australia is strictly implemented in accordance with the Australian standards. Our annealing process can greatly improve the corrosion resistance and dezine resistance of the products. The product meets the requirements of environmental protection, and can be widely used in various sanitary products and direct drinking water projects, so as to ensure the pure and health of drinking water.The quality control in the production process. First: the rough is checked by the inspector. The staff will measure the accuracy according to the drawing, and all the testing tools are imported from Australia. Second: inspectors carry out uninterrupted inspection of each product being produced. The packaging workshop tests the appearance and size of each product; third, the final product is checked, each product size must conform to the AS3688 drawing standard, and the quality inspection personnel record the product data of the test. In addition, for products that need to be tested for pressure, the inspectors will be able to test the airtightness or water tightness of each product professionally to ensure that each product reaches the pressure standard.Finally, in the packaging, especially in the export, we use a more solid packaging, we use small boxes to pack the products, and then put small boxes in large boxes, double packing to ensure the safety of the product, reduce the transport process damage to the product.First - class technology, advanced technology, perfect production process, precision testing equipment, every employee is in harmony with each other to highlight the spirit of Jiangxin. "Quality first, pragmatic and enterprising, user foremost, sincerity to heart" is our company's purpose. Stable quality and reasonable price are deeply trusted by domestic and overseas customers in the long term development.We will continue to innovate, improve and treat our customers with greater care.The attitude determines the height, the details determine the success or failure, the above is the summary of the high standard of our production process, not only in the process, in the enterprise staff management, equipment management, warehousing logistics, financial accounting, office environment and other aspects of the high standards of their own. With the continuous self demand and promotion, our product quality will also give customers the perfect use of experience, to help customers win honor and reputation in the market, to realize the vision of the leading enterprise in the field of pipeline fittings.
Copper Pressure Elbow and Other Sockets and Taps Copper Pressure Pipe Fittings Elbow of Water Supply System
Connection: Press
Shape: Equal
Head Code: Round
Angle: 90 Degree
Wall Thickness: 1.5mm
Zhejiang Jiangxin copper pipeline Co., Ltd. was established in 1990,located in the Ruanshi Industrial Park in Zhuji, Zhejiang province. The two section of the company covers an area of 20000 kilo meters and more than 200 employees. After 28 years of unremitting efforts with higher standards, the company has transformed from the original family workshop to a modern scale enterprise. The product line extends from the single copper refrigeration parts to a number of thousands of products, covering refrigeration,heating,machine fittings, water pipe fittings and valves etc. And strive to open up new areas and new channels to achieve the vision of pipe fittings leading enterprisesThe company has formed five series of products: Copper capillary series, Copper pressfit series, AC copper pipe fittings, Valve, cards and thread brass fittings. All the series of product not only to meet the customer's requirements for the national standard CJ/T-2000, the British standard BS864-2, the American Standard ASME B16.22-1995, the European standard EN1254-2 , but also to accept all kinds of non - standard fittings based on the special needs.The products of Jiangxin pipeline are certified by ISO9001 international quality system certification and AS 3688 Australia standard. The production process of raw materials inspection, raw material processing, annealing process, product quality inspection and finished packaging are strictly carried out according to Australian standards. Under constant demands and improvements, Jiang Xin has achieved the forefront of the industry in the following aspects.Rw material control. First, each batch of raw materials must be supplied with certificate of qualification and material element certificate. In accordance with the supplier's material sheet, the material is promptly notified to the responsible personnel of the material inspection, and the sample is inspecting. the unqualified raw materials will not be accepted. Second, the raw material, due to the change of the internal crystal after the forging process, we will test the rough after the forging in the lab. Third, because of the special use requirements of some products, such as the sealing product and the pressfit product, third times of stress need to be carried out, so the material composition is tested for third times. To ensure that the raw materials of the final product are qualified.Annealing process is a important step in the processing of products. Better annealing process can greatly improve the durability and safety of products. Our annealing process is carried out in strict accordance with Australian standards, and the products are annealed at stages. For example, the crystal will change and reorganize when the brass material is heated to a certain temperature, so the temperature control is critical, and the dezine resistance of the material can not be damaged. The DZR brass (Dezincification resistance of brass) exported to Australia is strictly implemented in accordance with the Australian standards. Our annealing process can greatly improve the corrosion resistance and dezine resistance of the products. The product meets the requirements of environmental protection, and can be widely used in various sanitary products and direct drinking water projects, so as to ensure the pure and health of drinking water.The quality control in the production process. First: the rough is checked by the inspector. The staff will measure the accuracy according to the drawing, and all the testing tools are imported from Australia. Second: inspectors carry out uninterrupted inspection of each product being produced. The packaging workshop tests the appearance and size of each product; third, the final product is checked, each product size must conform to the AS3688 drawing standard, and the quality inspection personnel record the product data of the test. In addition, for products that need to be tested for pressure, the inspectors will be able to test the airtightness or water tightness of each product professionally to ensure that each product reaches the pressure standard.Finally, in the packaging, especially in the export, we use a more solid packaging, we use small boxes to pack the products, and then put small boxes in large boxes, double packing to ensure the safety of the product, reduce the transport process damage to the product.First - class technology, advanced technology, perfect production process, precision testing equipment, every employee is in harmony with each other to highlight the spirit of Jiangxin. "Quality first, pragmatic and enterprising, user foremost, sincerity to heart" is our company's purpose. Stable quality and reasonable price are deeply trusted by domestic and overseas customers in the long term development.We will continue to innovate, improve and treat our customers with greater care.The attitude determines the height, the details determine the success or failure, the above is the summary of the high standard of our production process, not only in the process, in the enterprise staff management, equipment management, warehousing logistics, financial accounting, office environment and other aspects of the high standards of their own. With the continuous self demand and promotion, our product quality will also give customers the perfect use of experience, to help customers win honor and reputation in the market, to realize the vision of the leading enterprise in the field of pipeline fittings.