BV Certificate Natural Rubber Marine Airbag for Ship Lauching and Landing

After-sales Service: 24 Hours

Warranty: 24 Months

Standard: CB/T3795

Application: Salvaging, Ship Launching And Ashoring, Cargo Carrying

Customized: Customized

1. INTRODUCTION Marine Rubber Airbag is china independent intellectual property rights of innovative products, the products are mainly applied to ship launching and landing, weight lifting and moving, installation of underwater buoyancy aid to salvage sunken vessels etc. Airbags launching technology was developed based on traditional slipway launching mode, it overcomes the restrictions of traditional slipway launching mode. Our marine rubber airbags are less limited by space, no large mechanical equipment, can shorten the working period and save the unnecessary cost. Through years of development practice, our products are become more safety, effective and green environmental protection and they can launching a ship up to 100,000 DWT. Nowadays, Marine rubber airbags are widely used in the world. 2. AIRBAG STRUCTURE & MATERIAL REQUIREMENTS2.1 Airbag Structure "XINCHENG" Marine Rubber Airbags' structure is consists of the outer rubber layer synthetic cord reinforced rubber layers and inner rubber layer. Its shape characteristics: central body cylindrical + tapered on both ends.Cord layers: 4,5,6,7,8,9,10, layers Accessories: Pressure gage, Inlet valve, Pipe fitting and seal end ring. 2.2 Material Choose the best quality of imported natural rubber, such as smoked sheet rubber and 3L natural rubber from Thailand and Malaysia, which has good elasticity, ageing resistance, and will not take off layer. Meanwhile, During the process of produce rubber, we using efficient stabilizer to make rubber more environmentally friendly and no cracks. No Test item Required valueTest method1Tensile strength,MPa≥18ISO 372Elongation at break, %≥400ISO 373 Hardness, °(Shore A) 60±10ISO 7619-14Tear Strength, N/cm≥400ISO 34-15Compression set, %(70ºC±1ºC, 22h)≤30ISO 815-16After thermal ageing at 70ºC±1ºC, 96hHolding of pull lengthening, %≥80ISO 1887 Holding of elongation at break, %≥80ISO 1888 Change of hardness,°(Shore A)≤8ISO 7619-19Static ozone aging test at 40ºCx96h[ozone concentration(50±5)x10-8],extension 20% No crackISO 1431-12) Our marine rubber airbags' material using three strands synthetic-tyre-cords whose tensile strength can be 31 KG, which make our airbags more higher bearing capacity and safety. Figure 2. Synthetic-tyre-cord Wrap threads that run vertically through the synthetic tyre-cord pattern. Weft threads that run perpendicular to the warp threads. 3. SIZE AND SPECIFICATIONStandard size of Marine Rubber Airbags: Diameter (D): 0.8m-2.0m Effective length (EL): 6.0m-18m Total Length (TL): 7m-20m Cord layers: 4,5,6,7,8,9,10, layers Diameter(m) 1.01.21.51.82.0Medium Pressure (4-5) Test Pressure 0.14-0.160.12-0.140.10-0.120.08-0.100.07-0.09Working Pressure 0.12-0.140.10-0.120.08-0.100.07-0.090.06-0.08High Pressure(6-8) Test Pressure 0.22-0.260.20-0.240.15-0.200.13-0.160.12-0.15Working Pressure 0.20-0.240.17-0.220.13-0.180.11-0.140.10-0.13NOTE: Other size of airbags are also available follow customer's request. 4.PACKAGING AND SHIPMENT Packaging: All of airbags can be folded and then bundled up.Storage: When the airbags are not to be used for a long period of time, they should be drained,cleaned,dried,filled with talc powder, and the exterior surfaces should be coated with talc powder. The airbags should be maintained in a dry,ventilated room and be protected from light. The airbags should be stored in a relaxed condition free from tension,compression or other deformation. The airbags should be kept away from any heat source. The airbags should be protected from acids, alkalis, oils or organic solvents. FAQ1. Are you a factory or trading company?A: We are a factory. 2. What is your MOQ?A: ONLY 1 piece. 3. What is your lead time for production?A: Generally, production time is about 5 working days after receipt of deposit. 4. What is your payment terms?A: T/T and L/C at sight. 5. What is your warranty?A: Warranty is 24 months. 6. What certificate do you have?A: ISO9001:2008, CCS, SGS, BV, LR, RS.

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China

Ship Launching Airbag Lifting Airbag Floating Airbag Salvage Rubber Airbags

Standard: ISO14409-2011

Application: Salvaging, Ship Launching And Ashoring, Cargo Carrying

Customized: Customized

Condition: New

Name: Marine Airbag

Pneumatic Rubber Ship Launching Airbag Ship Launching Airbag :Marine Air Bags are also called rubber airbags, Ship Rubber Airbags, Marine Rubber Airbags, Floating Rubber Airbag, Ship Launching Airbags, pneumatic Boat Launching Airbag, Inflatable Airbags, Ship Marine Airbags, etc. They are made of rubber and multi-layer rubber tire fabric to make.Ship Salvage Lift Bags are widely used in launching, landing craft, ships, lifting, handling heavy objects, and rescue stranded ships.Marine Rubber Salvage Lift Bags are currently well received by shipyards, shipowners and ship supplies companies.Marine Rubber Airbag is our independent intellectual property rights of innovative products, the Floating Rubber Airbags are mainly applied to ship launching and landing, weight lifting and moving, installation of underwater buoyancy aid to salvage sunken vessels etc. Boat Launching Airbags launching technology was developed based on traditional slipway launching mode, Ship Marine Airbag overcomes the restrictions of traditional slipway launching mode. Our Salvage Lift Bags are less limited by space, no large mechanical equipment, can shorten the working period and save the unnecessary cost. Through years of development practice, our Marine Rubber Salvage Lift Bags are become more safety, effective and green environmental protection and they can launching a ship up to 100,000 DWT. If you need more information of Rubber Ship Launching Airbag please contact us directly .Diameter(m)Initial Pressure(KPa)Rated Working PressurePe (KPa)Bearing Capacity Per Meter In Length(kN/m)Minimum Burst Pressure (KPa)Layers0.825130114390with 3 layers of cord fabric1181001103001.215851122601.513701152101.835170149510with 4 layers of cord fabric1251301433901.2201101453301.516901482701.814801582400.848210184630with 5 layers of cord fabric1351701865101.2281401854201.5201101813301.81690178270145200219600with 6 layers of cord fabric1.2321652174901.5251302153901.8201102183301.00 55240264720with 7 layers of cord fabric1.20 452002646001.50 311602644801.80 251302573902.00 23116255348

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China

Evergreen Maritime Ship Launching Airbag

Standard: ISO14409:2011

Application: Salvaging, Ship Launching And Ashoring, Cargo Carrying

Customized: Customized

Condition: New

Size: as Client Requested

Evergreen Ship launching airbag 3.Construction FeaturesMarine rubber airbags' body include outer layer ,inner layer and synthetic-tire-cord layer.All the accessories are free for our clients.4.Specification&Capacity of regular size-6layers: DiameterSafty Working PressureWorking HeightCapacityKN/mTon/mLayer-6D0.8m0.24MPa0.5m122.412.9D1.0m0.22Mpa0.6m131.9513.46D1.2m0.18MPa0.7m141.3714.43D1.5m0.14MPa0.9m131.9513.46D1.8m0.12MPa1.1m131.9513.46D2.0m0.10MPa1.1m155.5115.87D2.5m0.10MPa1.3m162.3416.415.Testing and Quality:Evergreen are very focused on the quality. We invest advanced inspection equipment. 100% inflatable rubber airbags, hould be tested and inspected as per the requirement of CB/T 3795. Non conformed products are immediately rejected by Quality Control. The widely usage have been tested under rough condition. Our many satisfied customers are out best reference.Evergreen welcomes inspection by its customer's quality assurance departments and to their appointed agencies as CCS, Lloyd's, DNV, or ABS.To understand the whole Heavy Lifting / Caisson Launching process, please refer to our website /FAQQ1:What's the material of your products? A:Our raw material is natural rubber, and rubber-dipped nylon cord fabric Q2:Are you factory or trading company? A:We are the company and factory,located in Jimo City,Qingdao,near to Qingdao port and Qingdao airport,which is convenient for transportation. Q3:Can you do OEM? A:Yes,we can do.As long as receive your request,we could produce accordingly. Q4:What's your delivery time and payment terms? A:Delivery time is according to customers' size and order qty.The payment terms you could choose are T/T,L/C at sight,Western Union and so on. Q5:How can I get samples from you? A:We are honored to provide you samples for check quality.Customers just confirm freight collect and then we could send out the sample by FedEx,DHL,UPS,TNT and so on. Q6:What's certificates can your company provide? A:We can provide CCS,ABS,DNV,LR,BV certificates. Q7:What about your warranty time? A:Our warranty period is 24 months.During this time,any problems about products from our factory,we solemn promise to change and repair them for free;if problems from customers' improper operating,we could provide free guidance and repair materials.Our contact information is:Webber WongSales Director Qingdao Evergreen Maritime Co.,LtdNo.1 of Yongtai Road, Dianji Industrial Zone, Jimo Dist., Qingdao City, China Handphone : (0086) 176 6392 9299Office telephone : (0086) 532 6773 1892

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China

Ship Launching Airbag Heavy Lifting Ship Rubber Airbag Price for Sale

After-sales Service: 1 Year Free Service and Life-Time Service

Warranty: 1 Year

Standard: CB/T3837

Application: Salvaging, Ship Launching And Ashoring

Customized: Customized

Zhiyou Marine& Offshore Co., Ltd. (Shanghai) is an experienced supplier in ship building& Repairing and steel-structure market, specialized in customized design manufacturing, sales, installation, and maintenance service. Zhiyou has always been committed to providing the most cost-effective, punctual, and comprehensive solutions to meet various customers' needs.Zhiyou has been doing an OEM job for many reputable companies for many years, which makes the best guaranty for Zhiyou technical advantages with precise design. Zhiyou Marine& Offshore is designed according to ABS CCS BV LR DNV NK KR etc standard. In line with the responsibility spirit for customers, we try to satisfy the standards and the customers' requirements in the process of designing and manufacturing processes, as well as fully consider the basic cost. The products we providing will guarantee the quality and reasonable price, which ensures our cooperated customers can get the maximum value and minimum cos

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China

China TOP1 Factory Supplied Quality Marine Airbags for Salvage/Ship Launching

After-sales Service: 7 X 24

Warranty: 36 Months

Standard: CB/T3837

Application: Ship Launching And Ashoring

Customized: Customized

Marine Ship Launching AirbagsShip launching airbag (also known as marine airbag, rubber airbag, and ship launching balloon) are made of synthetic-tire-cord reinforcement layers and rubber layers. They are specialized vulcanized rubber airbags that are used for launching and upgrading marine vessels. This method of launching ships is called airbag launching, which is based on log-rolling method. Product Description Customer Feedback Airbag ComparisonDetailed Photos Underwater Lifting Airbags Tugboat Marine Fenders Yokohama Pneumaitc Fenders Company ProfileWith certification, product quality is More Guaranteed!Since 1990, Hongruntong Marine have been committed to the supplying of equipments, tools and solutions for the marine and offshore industry. Up to now, we have reached cooperation with 800+ customers in more than 30 countries and regions around the world.FAQ1. What's the material of your airbags? Material: Natural rubber + High strength tire cord fabric.2. What's the advantage of your airbags? Built and tested in accordance with CB/T3795 & CB/T3837 specifications. Third quality inspection. Stable price and delivery time. Best Customer Testimonials .3. How long about the shortest delivery time? Multiple production lines are synchronized to ensure delivery within the specified time.4. What's your MOQ of your airbags? MOQ: 1 Piece.5. What's the lifespan of your airbags? Lifespan: More than 10 years.6. What's the warranty period of your products? 36 months. Excellent quality reassures you and me.7. What's your standard of the airbags? To be satisfy with CB/T3795 & CB/T3837.8. What kind of certificate can you provide? DNV.GL, BV, CCS, ABS, LR certificates are available.

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China

Xincheng Maritime Ship Lifting and Docking Ship Launching Airbags Price

Standard: CB/T3795

Application: Salvaging, Ship Launching And Ashoring, Cargo Carrying

Customized: Customized

Condition: New

Color: Black

1. INTRODUCTION Marine Rubber Airbag is china independent intellectual property rights of innovative products, the products are mainly applied to ship launching and landing, weight lifting and moving, installation of underwater buoyancy aid to salvage sunken vessels etc. Airbags launching technology was developed based on traditional slipway launching mode, it overcomes the restrictions of traditional slipway launching mode. Our marine rubber airbags are less limited by space, no large mechanical equipment, can shorten the working period and save the unnecessary cost. Through years of development practice, our products are become more safety, effective and green environmental protection and they can launching a ship up to 100,000 DWT. Nowadays, Marine rubber airbags are widely used in the world. 2. AIRBAG STRUCTURE & MATERIAL REQUIREMENTS2.1 Airbag Structure "XINCHENG" Marine Rubber Airbags' structure is consists of the outer rubber layer synthetic cord reinforced rubber layers and inner rubber layer. Its shape characteristics: central body cylindrical + tapered on both ends.Cord layers: 4,5,6,7,8,9,10, layers Accessories: Pressure gage, Inlet valve, Pipe fitting and seal end ring. 2.2 Material Choose the best quality of imported natural rubber, such as smoked sheet rubber and 3L natural rubber from Thailand and Malaysia, which has good elasticity, ageing resistance, and will not take off layer. Meanwhile, During the process of produce rubber, we using efficient stabilizer to make rubber more environmentally friendly and no cracks. No Test item Required valueTest method1Tensile strength,MPa≥18ISO 372Elongation at break, %≥400ISO 373 Hardness, °(Shore A) 60±10ISO 7619-14Tear Strength, N/cm≥400ISO 34-15Compression set, %(70ºC±1ºC, 22h)≤30ISO 815-16After thermal ageing at 70ºC±1ºC, 96hHolding of pull lengthening, %≥80ISO 1887 Holding of elongation at break, %≥80ISO 1888 Change of hardness,°(Shore A)≤8ISO 7619-19Static ozone aging test at 40ºCx96h[ozone concentration(50±5)x10-8],extension 20% No crackISO 1431-12) Our marine rubber airbags' material using three strands synthetic-tyre-cords whose tensile strength can be 31 KG, which make our airbags more higher bearing capacity and safety. Figure 2. Synthetic-tyre-cord Wrap threads that run vertically through the synthetic tyre-cord pattern. Weft threads that run perpendicular to the warp threads. 3. SIZE AND SPECIFICATIONStandard size of Marine Rubber Airbags: Diameter (D): 0.8m-2.0m Effective length (EL): 6.0m-18m Total Length (TL): 7m-20m Cord layers: 4,5,6,7,8,9,10, layers Diameter(m) 1.01.21.51.82.0Medium Pressure (4-5) Test Pressure 0.14-0.160.12-0.140.10-0.120.08-0.100.07-0.09Working Pressure 0.12-0.140.10-0.120.08-0.100.07-0.090.06-0.08High Pressure(6-8) Test Pressure 0.22-0.260.20-0.240.15-0.200.13-0.160.12-0.15Working Pressure 0.20-0.240.17-0.220.13-0.180.11-0.140.10-0.13NOTE: Other size of airbags are also available follow customer's request. 4.PACKAGING AND SHIPMENT Packaging: All of airbags can be folded and then bundled up.Storage: When the airbags are not to be used for a long period of time, they should be drained,cleaned,dried,filled with talc powder, and the exterior surfaces should be coated with talc powder. The airbags should be maintained in a dry,ventilated room and be protected from light. The airbags should be stored in a relaxed condition free from tension,compression or other deformation. The airbags should be kept away from any heat source. The airbags should be protected from acids, alkalis, oils or organic solvents.

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China

China TOP1 Factory Supplied Quality Marine Airbags for Salvage/Ship Launching

After-sales Service: 7 X 24

Warranty: 36 Months

Standard: CB/T3837

Application: Ship Launching And Ashoring

Customized: Customized

Marine Ship Launching AirbagsShip launching airbag (also known as marine airbag, rubber airbag, and ship launching balloon) are made of synthetic-tire-cord reinforcement layers and rubber layers. They are specialized vulcanized rubber airbags that are used for launching and upgrading marine vessels. This method of launching ships is called airbag launching, which is based on log-rolling method. Product Description Customer Feedback Airbag ComparisonDetailed Photos Underwater Lifting Airbags Tugboat Marine Fenders Yokohama Pneumaitc Fenders Company ProfileWith certification, product quality is More Guaranteed!Since 1990, Hongruntong Marine have been committed to the supplying of equipments, tools and solutions for the marine and offshore industry. Up to now, we have reached cooperation with 800+ customers in more than 30 countries and regions around the world.FAQ1. What's the material of your airbags? Material: Natural rubber + High strength tire cord fabric.2. What's the advantage of your airbags? Built and tested in accordance with CB/T3795 & CB/T3837 specifications. Third quality inspection. Stable price and delivery time. Best Customer Testimonials .3. How long about the shortest delivery time? Multiple production lines are synchronized to ensure delivery within the specified time.4. What's your MOQ of your airbags? MOQ: 1 Piece.5. What's the lifespan of your airbags? Lifespan: More than 10 years.6. What's the warranty period of your products? 36 months. Excellent quality reassures you and me.7. What's your standard of the airbags? To be satisfy with CB/T3795 & CB/T3837.8. What kind of certificate can you provide? DNV.GL, BV, CCS, ABS, LR certificates are available.

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China

Diameter 1.5m X Length 12m Ship Launching Marine Rubber Airbag

Standard: ISO 14409:2011

Application: Ship Launching Landing Salvage

Customized: Customized

Condition: New

Diameter: 1.5m

Diameter 1.5m x Length 12m Ship Launching Marine Rubber AirbagUsage of Ship Launching and Docking Pneumatic Marine Rubber BalloonShip Launching Marine Airbags, also known as roller bags or ship launching rubber balloon, are made of heavy-duty synthetic-tire-cord layers with inner and out rubber layers in long cylindrical balloon shape. Marine Airbags for Ship Launching and Dry Docking for barge can be used for n Brazil, Indonesia Shipyard especially for barges launching, pull to shore, vessels' haul out and ship landing work.Comparison with other Launch WayRollers Bag is a innovative ship launching technology, comparing with "end-on launching", "side ship launching", "float-out". This ship launching technology overcomes the restrictions of fixed launching track of side-launch. Ship launching airbags are accepted by more and more shipyards world wide due to its advantages of saving time, saving investment, flexible, safety. The biggest vessel launched by ship launching airbags up to 100,000 DWT.Material of Marine Rubber BalloonInflatable Marine Airbags are to be constructed of an out rubber layer, multilayer heavy-duty synthetic-tire-cord layers, and an inner rubber layer vulcanized firmly. Ship launching marine airbags are cylindrical balloon body, with two conical head and end mouth. Air tightness swivel and air inlet kits are screwed with end mouth. Refer below picture.1.Construction FeaturesMarine rubber airbags' body include outer layer ,inner layer and synthetic-tire-cord layer.All the accessories are free for our clients.2.Specification DiameterSafty Working PressureWorking HeightCapacityKN/mTon/mLayer-6D0.8m0.24MPa0.5m122.412.9D1.0m0.22Mpa0.6m131.9513.46D1.2m0.18MPa0.7m141.3714.43D1.5m0.14MPa0.9m131.9513.46D1.8m0.12MPa1.1m131.9513.46D2.0m0.10MPa1.1m155.5115.87D2.5m0.10MPa1.3m162.3416.41More details for accessories3.Application 4.Queries1.MOQ: 1 PC2.Lifespan: 10 years 3.Guaranty period: 2 years4.Certificates: CCS, LR,DNV,BV,ABS,SGS.etc.5.factory with decades years' experience If need, contact me directly. Tel:+86 176 6392 9266

Besi Buy

Diamond Member

Audited Supplier

广东省 ,China